
Which API Specification Covers Which Tool, and How to Read a Licence Number
Published:
A certificate on a letterhead isn’t proof. This guide maps common completion tools to the API specifications that cover them, explains how an API Monogram licence number is built, and shows how to check it on the API Composite List before a part reaches incoming inspection.
A certificate on a letterhead is not a verification. The American Petroleum Institute publishes a live register, the API Composite List, and anyone can check whether a facility holds an active licence for a given specification. This guide maps the common completion tools to the specifications that cover them, explains how a licence number is structured, and walks through searching the register so your incoming-inspection process does not rely on a PDF the supplier sent you.
What is the short answer
Each API product specification covers one tool class: API 11D1 covers packers and bridge plugs, API 14L lock mandrels and landing nipples, API 19AC completion accessories, API 5CT casing and tubing. An API Monogram licence number, such as 11D1-XXXX, pairs the specification with one facility's API-assigned number. Check the number's status and scope on the API Composite List, compositelist.api.org.
- Liner hangers, openhole packers, centralizers and float equipment have API specifications that API does not license, so no API Monogram exists for them.
- An API Spec Q1 or ISO 9001 certificate registers a quality system and licenses no product.
- Only the status Active lets a supplier use the API marks today.
- Match specification, product, facility address and status against your purchase order every time.
Which API specification covers which completion tool
API's list of licensable specifications covers four of the main completion-tool classes: packers and bridge plugs, lock mandrels and landing nipples, completion accessories, and casing and tubing. Several other completion tools have an API specification that API does not license. API publishes the list on its Monogram Program Documents page, with one Licensing Information Form per specification naming the products a licence can cover.
The table gives the API specification scope for oilfield completion tools; its last column comes from api.org/products-and-services/api-monogram-and-apiqr/program-documents.
| Tool class | API specification | ISO counterpart | Can a supplier hold an API Monogram licence for it? |
|---|---|---|---|
| Packers and bridge plugs used inside casing or tubing | API 11D1 | ISO 14310 | Yes |
| Lock mandrels and landing nipples | API 14L | ISO 16070 | Yes |
| Completion accessories that form part of the tubing, such as mechanically shifted sliding sleeves and disconnect or tubing-movement tools | API 19AC | ISO 14998 | Yes |
| Casing, tubing, pup joints and couplings | API 5CT | ISO 11960 | Yes |
| Liner hangers, liner packers, liner hanger packers, tie-back and polished-bore receptacles, seal assemblies | API 19LH | None named in its scope | No. Not on API's licensable list |
| Openhole packers: swellable, inflatable and expandable | API 19OH | None named in its scope | No. Not on API's licensable list |
| Bow-spring casing centralizers | API 10D | ISO 10427-1 | No. Not on API's licensable list |
| Cementing float equipment | API 10F | ISO 10427-3 (numbered with the earlier recommended practice) | No. Not on API's licensable list |
| Stage cementing tools, casing scrapers, gas anchors, swab cups | None on API's licensable list | None | No |
A tool can be designed and tested to a specification API does not license. No supplier can hold an API Monogram licence for that specification, so "API certified" on such a tool needs a different question.
API 19AC covers accessories that form part of the tubing and that no other API downhole specification covers. API 19AC excludes liner and tubing hangers and surface-controlled sliding sleeves.
Once the specification is clear, the number on the certificate shows whether a supplier claims a licence for it.
How do you read an API licence number
An API Monogram licence number is written as the product specification followed by a number API assigns, such as 5CT-XXXX or 11D1-XXXX, where XXXX stands for that assigned number. The number identifies one licensee at one licensed facility, because API issues each licence for a site.
| Format on the document | What it is |
|---|---|
| 6A-XXXX, 5CT-XXXX, 11D1-XXXX | API Monogram licence under API 6A, API 5CT or API 11D1: the specification plus the assigned number |
| Q1-XXXX | API Spec Q1 registration |
| Q2-XXXX | API Spec Q2 registration |
| ISO-XXXX | ISO 9001 registration through API |
| ISO-EXXXX | ISO 14001 registration through API |
Only the first row is a product licence; the other four register a management system. API's marks guidance, document WI-2006, is the source for these formats and for the improper marks listed below.
Each specification carries its own number. A facility licensed to API 6A and API 6D shows two numbers, 6A-XXXX and 6D-XXXX, as WI-2006 sets out.
Correct marking on a monogrammed product shows the Monogram, its licence number beside it and the date of manufacture. The marking is applied at the licensed facility, on the tool body or nameplate. The licensee's name is larger and nearer to the Monogram than any other company's name.
API names three marks as improper:
- a Monogram without its licence number;
- the API logo used in place of the Monogram;
- the Monogram paired with the ANAB accreditation mark in a way that implies the licence is accredited.
The number tells you what to search; the register tells you whether it is valid today.
How do you search the API Composite List, step by step
The API Composite List is API's free, real-time public directory of Monogram licensees and registered quality systems, at compositelist.api.org. A licence check on the register takes seven steps. The register is where you check API certification for any supplier. An API certificate verification there shows the record as it stands on the day you search.
- Open the API Composite List at compositelist.api.org.
- Search the Certification # field with the licence number exactly as it is marked or printed.
- Try Company Name if nothing returns, first with the legal name on the quotation or invoice, then with any trading name. The register matches the name as registered.
- Match the city, country and facility on the record to the plant your tool came from, because each licence covers one site.
- Read the status: only Active allows the supplier to use the marks today, and the next section explains the other seven.
- Compare the record's products and scope with your purchase order line: the specification, the product type and, for API 11D1, the validation grade.
- Check the API fraud alerts page as well if you were sent a certificate rather than a marked tool. Then save a screenshot of the record in the supplier file. Repeat the check at goods receipt, because API updates the register in real time.
If the record and the document disagree, report it to API through the API Nonconformance Reporting website at ncr.api.org; if they agree, the status on the record decides the purchase.
What does it mean when a licence shows Canceled or Withdrawn
Canceled means API has revoked the licence or registration, and Withdrawn means the licence, registration or application is no longer valid; under either status the facility may not use the API marks or the number. Only Active allows use of the marks today. API spells the status "Canceled" with one l, so a licence you would call cancelled appears under that label.
The API Composite List uses eight status words, defined by API on its search page. Each one leads to a decision on your purchase.
| Status | What it means for your purchase |
|---|---|
| Active | The licence or registration is valid. The supplier may use the API marks within the listed scope. |
| Transitioned | The record moved to a new edition of the specification, which API calls a change in the certification basis, not a loss of certification. Confirm the current record covers your product. |
| Applicant | The facility has applied and is waiting for API's audit. The facility may not use the marks or numbers. |
| Suspended | API has paused the licence for a time. The facility may not use the marks. |
| Inactive | The licence is paused for a time, usually after a natural disaster or a similar event that stops work. The facility may not use the marks. |
| Expired | The licence was not renewed before the end of the certification cycle. The facility may not use the marks. |
| Canceled | API has revoked the licence. The facility may not use the marks. |
| Withdrawn | The licence, registration or application is no longer valid. The facility may not use the marks. |
Even an Active record proves less than many buyers assume.
Need expert guidance on the right solution?
Talk to our engineers about your project requirements.
What does the API Monogram certify, and what does it not
An API Monogram licence means API audited one facility's quality management system and product designs against API Spec Q1 and one product specification. The licence authorises that facility to mark conforming products of that specification with the Monogram, its licence number and the date of manufacture. That is what API certification of a product means, and no more. Under API Spec Q1 Annex A, only a licensee applies the Monogram and its number, and both are site-specific.
An Active licence does not cover:
- An 11D1-XXXX licence says nothing about a landing nipple or a liner hanger.
- Marking at another plant needs a separate agreement, the API Monogram Program Alternative Marking of Products License Agreement.
- An API 11D1 licence can be limited to certain product types and validation grades, and nothing outside that scope is covered.
- Nothing is covered once the status is not Active.
- A tool class with no licensable specification, such as a liner hanger under API 19LH, cannot carry a Monogram at all.
- A certificate API never issued proves nothing; API lists forged ones on the API fraud alerts page.
The API 11D1 specification defines its own validation grades, from V6 up to V0 with further grades added in its fourth edition, and a licence can be limited to some of them, so the grade on your order has to appear in the scope.
A misread document lets an unchecked tool into the completion string. The result can be a leak past a barrier, a tool that will not set or release, or a fishing job. Many suppliers send a quality-system certificate in place of a product licence.
How is API Spec Q1 different from ISO 9001, and why does neither license a product
API Spec Q1 is a quality management system specification for oil and gas manufacturers that API says meets most of the ISO 9001 requirements and adds requirements specific to the industry. API Spec Q1 and ISO 9001 both register a quality system, and neither licenses a product: a Monogram licence still needs the product's own specification and an audit against it.
API Spec Q1 covers how a facility runs its quality system, while API 11D1 covers the packer or bridge plug itself.
| Document | What it is | Number on the register | What it lets a supplier do |
|---|---|---|---|
| API Spec Q1 registration | A quality management system for oil and gas manufacturing | Q1-XXXX | Show a registered quality system, the base a Monogram licence is built on |
| ISO 9001 registration | A quality management system for any industry | ISO-XXXX when issued through APIQR | Show a registered quality system |
| API Monogram licence | A product licence for one specification at one site | For example 11D1-XXXX | Mark conforming products with the Monogram |
Within the API Monogram programme, API Spec Q1 limits which requirements a manufacturer may exclude. An applicant's Q1 system must have run for at least four months before a licence is granted.
The other Q1 is a product grade: API 11D1 and ISO 14310 define quality grades Q3, Q2 and Q1, with Q1 the strictest. "Q1" on a packer datasheet usually means that quality grade, not an API Spec Q1 registration. The same careful reading of numbers and grades applies to every supplier on a shortlist.
How do you verify any supplier, including Maximus OIGA Private Limited
A purchase order for an API-licensable tool should name the specification, the product type in the words of that specification's Licensing Information Form and, for API 11D1, the validation grade and quality grade. The order should also require the API Monogram and licence number on the product.
Ask every supplier for three things:
- the licence or registration number on the quotation, so the check runs before award rather than after delivery;
- the facility that will make the tool;
- the API Monogram and licence number marked on the product.
Some tool classes have no licensable specification, such as liner hangers, centralizers, float equipment and stage cementing tools. For these, ask which design standard the tool meets (API 19LH, API 10D or API 10F where one exists). Ask also for the validation test record against that standard's own test clause. Material and test records for each tool are a separate request from this check.
The same check applies to Maximus OIGA Private Limited. Ask us for the same things, in writing, for every tool on your quotation: the specification each tool is made to, the number that applies where the specification is licensable, and the facility. Our plant is at Manjusar/Savli GIDC, Vadodara. Then check what you receive on the register yourself; we would rather be checked than taken on trust.
What does this guide not settle
This guide explains how API specifications, registrations and licences work and how to check them; it judges no supplier and does not replace the specifications.
- This guide reports no company's status, so run the check yourself.
- Specification text is not reproduced here: API sells the specifications, and the requirements that bind an order are in them.
- What each validation grade proves is left to the specifications.
- Some products sit near a specification's boundary, such as cement retainers near API 11D1. Whether a licence covers one depends on the Licensing Information Form and the supplier's scope line, so check the scope, not the product name.
What else do reviewers ask about API licences
How do I search the API Composite List?
The API Composite List is searched by the Certification # first, then by Company Name with the legal name if the number returns nothing. Then match the facility, read the status and compare the scope with your purchase order. The seven steps above set out the full check, all on API's own register.
How long does an API licence last?
An API Monogram licence runs on a three-year cycle, with a renewal application every three years. Within each cycle API audits the facility on site, once for renewal and twice for surveillance. The status can change at any time, so check the register when you order and again when the tool arrives.
Does an API Spec Q1 certificate let a manufacturer apply the API Monogram?
An API Spec Q1 registration does not on its own allow a manufacturer to apply the API Monogram. The Monogram needs an API licence for the product's own specification, granted after an on-site audit against that specification. Only a licensee applies the mark and its licence number.
Does one API Monogram licence cover a manufacturer's second plant?
An API Monogram licence covers one site. A second plant needs its own licence, and applying the Monogram anywhere other than the licensed facility needs API's Alternative Marking of Products License Agreement. Match the facility on the register record to the plant that made your tool.
Is there a PDF of the API Composite List?
The API Composite List is a free, real-time online directory, so the current record is the one you search on API's site. A PDF or printed copy is a snapshot that cannot show today's status, so verify on compositelist.api.org rather than on a copy a supplier sends.
What are the warning signs that a supplier's API claim is not genuine?
The plainest warning sign is an API Monogram with no licence number beside it. Other signs: the API logo used in place of the Monogram; "API certified" on a tool class API does not license; a certificate on the API fraud alerts page; a number the register does not show as Active.
Related Blogs





More Information




