Completion tools from the six families: packer, bridge plug, liner hanger, float shoe, stage collar and sliding sleeve

Oil well tool manufacturers: global ranking by product family

Published:

Summary of the article

Twenty-four completion tool makers, majors and independents on the same rules — five global service companies and 19 makers in the US, India, China and the UAE, across six families.

Oil well tool manufacturers making completion tools: 24 qualify, five global service companies and 19 independent makers in the United States, India, China and the United Arab Emirates. Each was checked on its own website across six product families: packers, bridge plugs and cement retainers, liner hangers, float equipment, stage cementing tools and flow control. Eight name all six.

If you are building a shortlist, read this list against its criteria, not as a ranking: makers are grouped by product family, listed in alphabetical order and compared on the same seven points. A company comes off the list if its own website stops naming products in three of the six families, describes it as a reseller rather than a maker, or drops its address.

The list covers completion tools, the equipment that finishes a well for production, not drill bits or other drilling tools.

Maximus OIGA Private Limited publishes this guide and appears in it with its gaps shown, judged under the same rules and on the same seven points as every other maker.

Key takeaways

  • The 24 oil well tool manufacturers on this list are five global service companies and 19 independent makers in the United States, India, China and the United Arab Emirates.
  • Eight of the 24 name at least one product in each product family, all six of them: three of the service companies and five of the independents.
  • Packers are the most widely named family, listed by 22 of the 24 makers; flow control is named by 16, and float equipment, the least covered, by 13.
  • Lead times are published by one maker on the list, Maximus OIGA Private Limited, the publisher of this guide, at 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class for the SpectraMax line.
  • Spec data in the form of size or spec tables is published by 13 of the 24 makers, and Maximus OIGA Private Limited is one of the six that publish none on their catalogue pages.
  • Certification and licence status is not listed for any company, the publisher included; the steps further down show how to verify a licence on the public register, which documentation to ask for, and what else to check.

How did a manufacturer qualify for this list, and what would remove it

An independent manufacturer qualified for this list when its own website named products in at least three of the six completion families, said the company manufactures them itself, and published a street address for the company. The five global service companies qualified by naming their own branded products in at least three of the six families.

A site that describes the company as a distributor, wholesaler, sourcing agent or marketplace does not pass, however many products it lists. Here is what counts in each product family:

  • Packers count when the site names production, retrievable, permanent or service packers.
  • Bridge plugs and cement retainers count with either a bridge plug or a cement retainer; a frac plug alone does not count.
  • Liner hangers count with a liner hanger body, a liner top packer or a liner running tool.
  • Float equipment counts with a float shoe, float collar or guide shoe; a casing flotation device does not.
  • Stage cementing tools count with a stage cementing collar or a multi-stage cementer; a frac sleeve does not.
  • Flow control counts with a landing nipple, sliding sleeve or lock mandrel; a toe sleeve or frac sleeve does not.

Every maker was then compared on the same seven points, the criteria a sourcing lead checks before an RFQ:

  1. The product families it names, out of six.
  2. Where it says it builds.
  3. Whether it publishes spec data, such as size or spec tables or a datasheet.
  4. Whether it publishes lead times.
  5. Whether it states build to order or custom work.
  6. Whether it names the order documents, meaning the documentation that ships with an order, such as the material test report, inspection and test plan, heat traceability record and test record.
  7. Whether it states field running support, meaning field support in which its own engineers run or set the tools.

In the tables, "Not stated" and "Not found" mean the company's own website does not say it on the pages read. They do not mean the company cannot do it.

Three things remove a company from the list: its site stops naming products in three of the six families, describes it as a reseller or sourcing agent rather than a maker, or drops its address.

This list does not score certification or licence status, registration details, founding dates, installation counts, customer names, company size, prices, or pressure and temperature ratings, because none of them is published evenly enough across these makers to compare. The verification steps further down show how to check the ones an approval process needs.

All 24 makers are set against the six families and the seven points in the two tables below.

Which manufacturers cover which product families

The 24 manufacturers on this list compare like this: packers are named by 22 of them and float equipment by 13, eight name products in all six families, 13 publish spec tables and one publishes lead times.

Table A. Which manufacturer names which product family

ManufacturerType or countryPackersBridge plugs and cement retainersLiner hangersFloat equipmentStage cementing toolsFlow controlFamilies named (of six)
Global service companies
Baker HughesGlobal service companyNamedNamedNamedNamedNot foundNamed5
HalliburtonGlobal service companyNamedNamedNamedNamedNamedNamed6
NOVGlobal service companyNamedNamedNamedNamedNamedNamed6
SLBGlobal service companyNamedNamedNamedNot foundNot foundNamed4
WeatherfordGlobal service companyNamedNamedNamedNamedNamedNamed6
Independent manufacturers
American Completion ToolsUnited StatesNamedNamedNot foundNot foundNot foundNamed3
Aventus Oil ToolsUnited Arab EmiratesNamedNamedNamedNamedNamedNamed6
China Vigor Drilling Oil Tools and EquipmentChinaNamedNamedNot foundNot foundNot foundNamed3
Completion Oil ToolsIndiaNamedNamedNamedNamedNot foundNamed5
D&L Oil ToolsUnited StatesNamedNamedNot foundNot foundNot foundNamed3
Dongying Yuxin MachineryChinaNamedNot foundNamedNot foundNamedNot found3
Frontier Oil ToolsUnited StatesNamedNamedNamedNot foundNot foundNot found3
Gradwell OilfieldIndiaNamedNamedNamedNamedNamedNamed6
InnovexUnited StatesNamedNamedNamedNamedNamedNamed6
Jingzhou Sunrise Energy TechnologyChinaNamedNamedNamedNot foundNot foundNamed4
Mackeral Oil ToolsIndiaNot foundNot foundNamedNamedNamedNot found3
Maximus OIGA Private LimitedIndiaNamedNamedNamedNamedNamedNamed6
Oilmec Drilling EquipmentsIndiaNamedNamedNamedNamedNamedNamed6
Parveen IndustriesIndiaNamedNamedNot foundNot foundNot foundNamed3
Peak CompletionsUnited StatesNamedNamedNamedNot foundNamedNot found4
Puyang Zhongshi Group (PYZS)ChinaNamedNot foundNamedNamedNamedNot found4
Shandong Saigao GroupChinaNot foundNot foundNamedNamedNamedNot found3
TAM InternationalUnited StatesNamedNamedNot foundNot foundNamedNot found3
Wellcare Oil ToolsIndiaNamedNamedNamedNot foundNot foundNot found3
Makers naming the family 222019131416 

Named: the company's own website names at least one product in that family. Not found: not found on the pages read, which does not mean the company cannot supply it; ask.

Table B. What each one publishes about itself

ManufacturerWhere it says it buildsSpec dataLead timesBuild to orderOrder documentsField running support
Global service companies      
Baker HughesNot stated on the product pages readPartlyNot statedPartlyNot statedNot stated
HalliburtonNot stated on the product pages readPublishedNot statedStatedNot statedPartly
NOVCompletion Tools address in Houston, Texas; manufacturing sites not namedPublishedNot statedPartlyNot statedStated
SLBNot stated on the product pages readNot statedNot statedPartlyNot statedNot stated
WeatherfordNot stated on the product pages readPartlyNot statedStatedNot statedPartly
Independent manufacturers      
American Completion ToolsBurleson, Texas; tools assembled, tested, packaged and labelled there; in-house CNC machining describedNot statedNot stated (shipping transit times only)Not statedNot statedNot stated
Aventus Oil ToolsDubai Investment Park 2, Dubai; machining, assembly and testing described; address not labelled a plantPartlyNot statedStatedNot statedStated
China Vigor Drilling Oil Tools and EquipmentOffice address in Xi'an; site states four plants in China without their locationsPublishedNot statedPartlyNot statedNot stated
Completion Oil ToolsRIICO Industrial Area, Khushkhera, Bhiwadi, Rajasthan; in-house manufacturing facilityPublishedNot statedStatedNot statedStated
D&L Oil ToolsManufacturing facility in Tulsa, Oklahoma; states it is a manufacturer onlyPublishedNot statedStatedPartlyNot stated
Dongying Yuxin MachineryShengli Industrial Park, Dongying, Shandong; direct manufacturerPublishedNot statedStatedPartlyNot stated
Frontier Oil ToolsHouston, Texas address on its manufacturing page; in-house machining to final acceptance pressure testingPublishedNot statedStatedNot statedPartly
Gradwell OilfieldUncha Mazra, Pataudi, Gurugram district, Haryana; manufacturing facility describedPublishedNot statedPartlyNot statedStated
InnovexCorporate office in Humble, Texas; Amelia, Louisiana labelled manufacturingPartlyNot statedNot statedNot statedNot stated
Jingzhou Sunrise Energy TechnologyYinhu Industrial Park, Shashi District, Jingzhou, Hubei; manufacturing, assembly and testing describedPublishedNot statedNot statedNot statedNot stated
Mackeral Oil ToolsNear IMT Manesar, Gurugram, Haryana; designs, manufactures, assembles and testsPartlyNot statedPartlyNot statedStated
Maximus OIGA Private LimitedOne plant at Manjusar / Savli GIDC, Vadodara, GujaratNot statedPublished: 1 to 4, 4 to 12, 8 to 16 or more weeks by product classStatedStatedNot stated
Oilmec Drilling EquipmentsVillage Prithla, Palwal, Haryana; manufacturing unit pagePublishedNot statedPartlyNot statedNot stated
Parveen IndustriesRegistered office in Delhi; manufacturing facilities in Delhi, Haryana and Mumbai describedPublishedNot statedStatedNot statedNot stated
Peak CompletionsCorporate headquarters in Midland, Texas; in-house machine shop described, site not namedNot statedNot statedStatedNot statedPartly
Puyang Zhongshi Group (PYZS)Mazhuangqiao Industry Zone, Puyang, Henan; nine factories describedNot statedNot statedNot statedNot statedNot stated
Shandong Saigao GroupJinan, Shandong; processing and manufacturing describedPublishedNot statedStatedNot statedNot stated
TAM InternationalHouston, Texas; states its products are made in the USA; address not labelled a plantNot statedNot statedStatedNot statedNot stated
Wellcare Oil ToolsPlant at Khushkhera, Alwar, RajasthanPublishedNot statedPartlyPartlyStated

Published or Stated: the company's own website says it. Partly: a weaker statement, such as materials or sizes on request, or data without tables. Not stated: not found on its own website, which does not mean the company cannot do it; ask.

The lists below take the same findings family by family, with the product or line each maker names, the SpectraMax line among them.

Who makes each product family

Each product family below lists the makers whose own websites name products in it, global service companies first and then independent manufacturers, in alphabetical order.

Packers

Packers seal the annulus between the tubing and the casing so that production or treatment is isolated to one interval. 22 of the 24 makers on this list name packers on their own websites.

Global service companies

  • Baker Hughes: Granite hydraulic-set production packer
  • Halliburton: production packers; service packers
  • NOV: N-32 tension set service packer
  • SLB: QLH permanent hydraulic-set production packer
  • Weatherford: sealbore packers; single-string packers

Independent manufacturers

  • American Completion Tools (United States): permanent, hydraulic and mechanical packers
  • Aventus Oil Tools (United Arab Emirates): hydraulic retrievable production packer
  • China Vigor Drilling Oil Tools and Equipment (China): AS1X retrievable packer
  • Completion Oil Tools (India): hydraulic, mechanical and seal bore packers
  • D&L Oil Tools (United States): Titan V3 and DLH packers
  • Dongying Yuxin Machinery (China): Y445 retrievable production packer series
  • Frontier Oil Tools (United States): hydraulic, mechanical and permanent packers
  • Gradwell Oilfield (India): GR-HPR-1 hydraulic set retrievable packer
  • Innovex (United States): KS1-XW packer; service packers
  • Jingzhou Sunrise Energy Technology (China): SRP-2 hydraulic-set retrievable packer
  • Maximus OIGA Private Limited (India): SpectraMax Pak-I hydraulic retrievable production packer; sealbore packers; service packers
  • Oilmec Drilling Equipments (India): HY-6 hydraulic set production packer
  • Parveen Industries (India): Model DB hydraulic set permanent packer
  • Peak Completions (United States): production and injection packers; service packers
  • Puyang Zhongshi Group (PYZS) (China): mechanical packer
  • TAM International (United States): casing annulus packer (CAP)
  • Wellcare Oil Tools (India): WC-HP-1 hydraulic set retrievable packer

Bridge plugs and cement retainers

A bridge plug seals the casing below an interval; a cement retainer lets cement be squeezed through it into the zone below and then keeps it in place. 20 of the 24 makers on this list name bridge plugs and cement retainers on their own websites.

Global service companies

  • Baker Hughes: Model K-1 cement retainer
  • Halliburton: Fas Drill bridge plug; EZ Drill SVB squeeze packer, sold as the cement retainer
  • NOV: NTSU retrievable bridge plug; cast iron cement retainer
  • SLB: wireline-set retrievable bridge plug
  • Weatherford: retrievable bridge plugs

Independent manufacturers

  • American Completion Tools (United States): Model BKR bridge plug; cement retainers
  • Aventus Oil Tools (United Arab Emirates): A-PBP permanent bridge plug; A-PCR cement retainer
  • China Vigor Drilling Oil Tools and Equipment (China): VMCR mechanical cement retainer; cast iron bridge plug
  • Completion Oil Tools (India): CT-WRBP retrievable bridge plug; CT-MCR cement retainer
  • D&L Oil Tools (United States): AS retrievable bridge plug
  • Frontier Oil Tools (United States): Tsunami cast iron bridge plug; composite cement retainers
  • Gradwell Oilfield (India): GR-RBP-W retrievable bridge plug; GR-CR-W cement retainer
  • Innovex (United States): retrievable bridge plugs
  • Jingzhou Sunrise Energy Technology (China): SRB-2 retrievable bridge plug; MCR cement retainer
  • Maximus OIGA Private Limited (India): SpectraMax WBP wireline set bridge plug; SpectraMax PCR mechanical set cement retainer
  • Oilmec Drilling Equipments (India): retrievable wireline set bridge plug
  • Parveen Industries (India): Model BKR bridge plug and cement retainer
  • Peak Completions (United States): bridge plugs and retainers
  • TAM International (United States): permanent bridge plugs
  • Wellcare Oil Tools (India): WC-MSRBP bridge plug; WC-MCR cement retainer

Liner hangers

Liner hangers hang a liner from the casing above it, and usually carry a liner top packer that seals the gap. 19 of the 24 makers on this list name liner hangers on their own websites.

Global service companies

  • Baker Hughes: Hyflo III liner hanger; ZXP liner top packer
  • Halliburton: VersaFlex XSL expandable liner hanger
  • NOV: GS liner hanger; TXP liner top packer
  • SLB: Xcelis liner hanger systems
  • Weatherford: IntegraLine liner system

Independent manufacturers

  • Aventus Oil Tools (United Arab Emirates): hydraulic rotating and non-rotating liner hangers
  • Completion Oil Tools (India): hydraulic liner hanger; tie-back system
  • Dongying Yuxin Machinery (China): XG series liner hangers
  • Frontier Oil Tools (United States): PermaFlex hydraulic liner hanger; LTSeries liner top packer
  • Gradwell Oilfield (India): hydraulic and mechanical set liner hangers
  • Innovex (United States): Ranger liner hanger; Scout liner top packer
  • Jingzhou Sunrise Energy Technology (China): HLH liner hanger; MLDS liner top packer
  • Mackeral Oil Tools (India): MI 5101 hydraulic rotating liner hanger; MI 5168 running tool
  • Maximus OIGA Private Limited (India): SpectraMax pocket-slip and dual-cone hydraulic liner hangers with liner top packer
  • Oilmec Drilling Equipments (India): OM-PRHLH rotating hydraulic liner hanger; OM-PLTP liner top packer
  • Peak Completions (United States): Sentinel liner hanger system; liner top packer
  • Puyang Zhongshi Group (PYZS) (China): liner hanger
  • Shandong Saigao Group (China): SYX-A hydraulic liner hanger; J-A mechanical liner hanger
  • Wellcare Oil Tools (India): WC-HLHP liner hanger; WC-LTP-ZX liner top packer

Float equipment

Float equipment, the float shoes and float collars at the bottom of the casing, stops cement flowing back up after it is pumped. 13 of the 24 makers on this list name float equipment on their own websites.

Global service companies

  • Baker Hughes: Bakerline float shoes, float collars and guide shoes
  • Halliburton: SuperFill surge reduction float equipment
  • NOV: float collar; float shoe
  • Weatherford: SecureTrac compact casing shoe system; float equipment

Independent manufacturers

  • Aventus Oil Tools (United Arab Emirates): A-CFC float collar; A-CFS float shoe
  • Completion Oil Tools (India): CT-CFC-SV float collar; CT-CDFS float shoe
  • Gradwell Oilfield (India): float shoe and float collars
  • Innovex (United States): float collars and shoes; guide shoes
  • Mackeral Oil Tools (India): float shoe; float collar
  • Maximus OIGA Private Limited (India): SpectraMax cement float shoe, float collar and guide shoe
  • Oilmec Drilling Equipments (India): OM101 float shoe; OM103-GS guide shoe
  • Puyang Zhongshi Group (PYZS) (China): double valve float collar
  • Shandong Saigao Group (China): double valve float shoe and collar; guide shoes

Stage cementing tools

Stage cementing tools open a port part way up the casing so that a long string can be cemented in two or more stages. 14 of the 24 makers on this list name stage cementing tools on their own websites.

Global service companies

  • Halliburton: Fidelis stage cementer
  • NOV: PureFlow stage cementing tool
  • Weatherford: SwageSet POST pack-off stage cementers

Independent manufacturers

  • Aventus Oil Tools (United Arab Emirates): A-SSC mechanical and hydraulic stage cementing collars
  • Dongying Yuxin Machinery (China): stage cementing collar
  • Gradwell Oilfield (India): stage cementing tool
  • Innovex (United States): ACE stage tool; stage cementing collars
  • Mackeral Oil Tools (India): MI 4101 hydraulic stage cementing tool
  • Maximus OIGA Private Limited (India): MDVX hydraulic and MDV mechanical stage cementing collars
  • Oilmec Drilling Equipments (India): OM107-H hydraulic stage tool
  • Peak Completions (United States): cement stage tools
  • Puyang Zhongshi Group (PYZS) (China): mechanical stage cementing collar
  • Shandong Saigao Group (China): HSC-A hydraulic stage cementing collar
  • TAM International (United States): pump-out stage cementing collar

Flow control

Flow control equipment, meaning landing nipples, lock mandrels and sliding sleeves, lets tools be set in the tubing and opens or closes flow between the tubing and the annulus. 16 of the 24 makers on this list name flow control on their own websites.

Global service companies

  • Baker Hughes: landing nipples; sliding sleeves
  • Halliburton: X and R landing nipples and lock mandrels
  • NOV: Elmar flow control nipples and sliding sleeves
  • SLB: sliding sleeves; seating and landing nipples
  • Weatherford: OptiSleeve sliding sleeves; UniSet QX lock mandrel and QN nipple

Independent manufacturers

  • American Completion Tools (United States): RPT no-go landing nipple and lock mandrel; Model L sliding sleeve
  • Aventus Oil Tools (United Arab Emirates): A-LNX landing nipple; A-LMX lock mandrel; A-SSD sliding sleeve
  • China Vigor Drilling Oil Tools and Equipment (China): hydraulic dual line sliding sleeve
  • Completion Oil Tools (India): CT-L sliding sleeve; CT-LNP-X landing nipple; CT-LM lock mandrel
  • D&L Oil Tools (United States): profile nipple
  • Gradwell Oilfield (India): sliding sleeves; landing nipples; blanking plugs
  • Innovex (United States): landing nipple
  • Jingzhou Sunrise Energy Technology (China): landing nipples; sliding sleeves
  • Maximus OIGA Private Limited (India): SpectraMax MX landing nipple, MX lock mandrel and ML sliding sleeve
  • Oilmec Drilling Equipments (India): OM-LNP-X landing nipple
  • Parveen Industries (India): RPT no-go landing nipple and lock mandrel; Model L sliding sleeve

The entries below set out what each maker publishes about itself, company by company.

What does each manufacturer publish about itself

Each entry below is built from the company's own website, in the same four parts: where it says it builds, the families it names, what it publishes, and what to ask it for. Where an entry says to ask for the documentation pack, that means the material test report, inspection and test plan, heat traceability record and test record from the criteria above.

Global service companies

Baker Hughes

Baker Hughes names five of the six families on its own website, all except stage cementing: the Granite production packer, Model K-1 cement retainer, Hyflo III liner hanger with ZXP liner top packer, Bakerline float equipment, and landing nipples and sliding sleeves. It publishes a spec sheet for the K-1 retainer, but its product pages do not say where a tool is built. Ask it for the datasheet for your size and the build location.

Halliburton

Halliburton names all six families on its own website, among them packers, the Fas Drill bridge plug, VersaFlex XSL liner hanger, SuperFill float equipment, Fidelis stage cementer and X and R landing nipples. It publishes data sheets and catalogues and says its tools can be adapted to the well, but its product pages do not say where a tool is built. Ask it where your order is built and which documents ship with it.

NOV

NOV names all six families on its own website, among them the N-32 service packer, NTSU bridge plug, GS liner hanger with TXP liner top packer, PureFlow stage cementing tool and Elmar sliding sleeves. It publishes a datasheet per product and a Completion Tools address in Houston, Texas, without naming its manufacturing sites, and says it will install and provide completion products. Ask it for a written lead time and the documentation pack.

SLB

SLB names four of the six families on its own website: the QLH permanent production packer, a wireline-set retrievable bridge plug, Xcelis liner hanger systems, and sliding sleeves and landing nipples. Float and stage cementing appear as a cementing service, with no hardware listed. Its completion pages carry no datasheets and do not say where a tool is built. Ask it for the datasheet, the build location and the documents.

Weatherford

Weatherford names all six families on its own website, among them sealbore packers, retrievable bridge plugs, the IntegraLine liner system, the SecureTrac casing shoe system, SwageSet POST stage cementers and OptiSleeve sliding sleeves. It publishes spec sheets through a central hub and says its engineers can custom-build float equipment, but its product pages do not say where a tool is built. Ask it for a written lead time and the documentation pack.

Independent manufacturers

American Completion Tools

American Completion Tools, based in Burleson, Texas, names three of the six families on its own website: packers, the Model BKR bridge plug with cement retainers, and RPT landing nipples, lock mandrels and Model L sliding sleeves. It says its tools are assembled and tested there, with in-house CNC machining. It publishes no spec tables, and gives shipping transit times, not build times. Ask it for the datasheet and a production lead time.

Aventus Oil Tools

Aventus Oil Tools, based in Dubai Investment Park 2, Dubai, names all six families on its own website, including A-SSC stage cementing collars and A-SSD sliding sleeves, and describes machining, assembly and testing. It publishes datasheets with size ranges, custom work to well conditions, and field running support, redressing and workshop training. Ask it for a written lead time and the documentation pack.

China Vigor Drilling Oil Tools and Equipment

China Vigor Drilling Oil Tools and Equipment, based in Xi'an, names three of the six families on its own website: the AS1X retrievable packer, the VMCR cement retainer and cast iron bridge plug, and a hydraulic dual line sliding sleeve. It says it runs four plants in China without naming where, and publishes parameter tables and custom size ranges. Ask it which plant builds your order, and for the documents.

Completion Oil Tools

Completion Oil Tools, based in the RIICO Industrial Area at Khushkhera, Bhiwadi, Rajasthan, names five of the six families on its own website and describes an in-house manufacturing facility; no stage cementing tool was found. It publishes catalogues with size tables, custom solutions for each well condition, and liner hanger running services by its field engineers. Ask it for a written lead time and the documentation pack.

D&L Oil Tools

D&L Oil Tools, based in Tulsa, Oklahoma, names three of the six families on its own website: Titan V3 and DLH packers, the AS retrievable bridge plug and a profile nipple. It describes itself as a manufacturer only and offers no field service. It publishes a catalogue, custom-designed equipment, and quality data packages for traceability on its customer portal. Ask it for a lead time, and whether the data package ships with the order.

Dongying Yuxin Machinery

Dongying Yuxin Machinery, based in Shengli Industrial Park, Dongying, Shandong, names three of the six families on its own website: Y445 production packers, XG series liner hangers and a stage cementing collar. A direct manufacturer by its own description, it publishes product tables, supplies to drawing, says material documents can be discussed, and confirms lead time once specification and quantity are fixed. Ask it for the document list, written into the purchase order.

Frontier Oil Tools

Frontier Oil Tools, based in Houston, Texas, names three of the six families on its own website: packers, the Tsunami cast iron bridge plug with composite cement retainers, and the PermaFlex liner hanger with the LTSeries liner top packer. It describes in-house machining through to final acceptance pressure testing, and publishes data sheets per size, customisable isolation and field service teams. Ask it for a written lead time and the documentation pack.

Gradwell Oilfield

Gradwell Oilfield, based in Uncha Mazra, Pataudi, Gurugram district, Haryana, names all six families on its own website, including float shoes and collars and a stage cementing tool, and describes a manufacturing facility. It publishes catalogues with size tables, other materials on order, and field support engineers for running and redressing. Ask it for a written lead time and the documentation pack.

Innovex

Innovex, based in Humble, Texas, with Amelia, Louisiana listed as manufacturing, names all six families on its own website, including the Ranger liner hanger with the Scout liner top packer and the ACE stage tool; no cement retainer was found. It publishes one-page spec sheets without size tables. Ask it for size data, a lead time and the documents.

Jingzhou Sunrise Energy Technology

Jingzhou Sunrise Energy Technology, based in Yinhu Industrial Park, Shashi District, Jingzhou, Hubei, names four of the six families on its own website: the SRP-2 packer, the SRB-2 bridge plug and MCR cement retainer, the HLH liner hanger with the MLDS liner top packer, and landing nipples and sliding sleeves. It publishes size tables and describes manufacturing, assembly and testing. Ask it for a lead time, the documents, and who supports a run outside China.

Mackeral Oil Tools

Mackeral Oil Tools, based near IMT Manesar, Gurugram, Haryana, names three of the six families on its own website: the MI 5101 rotating liner hanger and running tool, float shoes and collars, and the MI 4101 stage cementing tool. It says it designs, manufactures, assembles and tests, and publishes size ranges in text, materials to requirement, and liner hanger running services. Ask it for the datasheet, a lead time and the documents.

Maximus OIGA Private Limited

Maximus OIGA Private Limited, based at one plant in Manjusar / Savli GIDC, Vadodara, names all six SpectraMax families on its own website. It publishes lead-time bands of 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class, builds to order, and names the documents shipped with each order. It publishes no size tables, and the buyer's service company runs the tools. Ask it for the datasheet.

Oilmec Drilling Equipments

Oilmec Drilling Equipments, based in Village Prithla, Palwal, Haryana, names all six families on its own website, including the OM107-H hydraulic stage tool and the OM-LNP-X landing nipple, and has a manufacturing unit page. It publishes a catalogue with tables and offers sizes on customer demand. Ask it for a written lead time, the documents, and who runs the tool.

Parveen Industries

Parveen Industries, based in Delhi, with manufacturing facilities in Delhi, Haryana and Mumbai, names three of the six families on its own website: the Model DB permanent packer, Model BKR bridge plug and cement retainer, and RPT landing nipples, lock mandrels and Model L sliding sleeves. It publishes a spec table and PDF datasheet per product, and custom designs. Ask it which plant builds your order, and for a lead time and the documents.

Peak Completions

Peak Completions, based in Midland, Texas, with an in-house machine shop at a location it does not name, names four of the six families on its own website: production, injection and service packers, bridge plugs and retainers, the Sentinel liner hanger with a liner top packer, and cement stage tools. It publishes no spec tables, and states custom solutions and field service teams. Ask it for the datasheet, a lead time and the documents.

Puyang Zhongshi Group (PYZS)

Puyang Zhongshi Group (PYZS), based in Mazhuangqiao Industry Zone, Puyang, Henan, names four of the six families on its own website: a mechanical packer, a liner hanger, a double valve float collar and a mechanical stage cementing collar. It says it runs nine factories, and publishes size ranges in text with no tables. Ask it which factory builds the tool, and for the size data and a lead time.

Shandong Saigao Group

Shandong Saigao Group, based in Jinan, Shandong, names three of the six families on its own website: SYX-A hydraulic and J-A mechanical liner hangers, double valve float shoes and collars with guide shoes, and the HSC-A hydraulic stage cementing collar. It describes processing and manufacturing, and publishes size tables and customisation. Ask it for a written lead time and the documents.

TAM International

TAM International, based in Houston, Texas, names three of the six families on its own website: a casing annulus packer, permanent bridge plugs and a pump-out stage cementing collar, and says its products are made in the USA. No spec tables appear on the pages read, and it states custom-engineered solutions. Ask it for the datasheet, a lead time and the documents.

Wellcare Oil Tools

Wellcare Oil Tools, based at its plant in Khushkhera, Alwar, Rajasthan, names three of the six families on its own website: the WC-HP-1 packer, the WC-MSRBP bridge plug and WC-MCR cement retainer, and the WC-HLHP liner hanger with the WC-LTP-ZX liner top packer. It publishes a catalogue with size tables, sizes on request, and engineers for training, running and redressing. Ask it for a written lead time and the documents that ship with the order.

Across the 24 entries, the gap that repeats most often is lead times.

What do almost none of these manufacturers publish

Lead times are published by one of the 24 makers on this list: 23 publish no production lead time, and the one that does is Maximus OIGA Private Limited, the publisher of this guide. Its bands for the SpectraMax line are 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class.

American Completion Tools publishes shipping transit times, not build times, and several others promise fast or on-time delivery without a figure.

Order documents are missing almost as widely. One maker, Maximus OIGA Private Limited, names the full documentation pack that ships with an order. Three mention part of one: D&L Oil Tools offers quality data packages on a customer portal, Dongying Yuxin Machinery says inspection records and material documents can be discussed, and Wellcare Oil Tools describes traceability as an internal process. The other 20 name nothing, so a buyer who needs a material test report, an inspection and test plan or heat traceability has to ask for each one.

Where a tool is built is missing at the top of the market. None of the five global service companies names, on the product pages read, the plant that builds a given completion tool.

Two gaps run the other way, and this guide's publisher has both. Spec data is the first: 11 of the 24 makers publish no full size or spec tables, six with no spec data at all and five with partial data, and Maximus OIGA Private Limited is one of the six with none. Field running support is the second: six of the 24 say their own engineers run or set the tools, and Maximus OIGA Private Limited is not one of them, because its tools are run by the buyer's service company.

Each gap costs the buyer time. Without a lead time, the well schedule waits until every quotation is back. If no documents are named, the shortfall surfaces at QA acceptance, late in the order, when someone has to approve the shipment. A buyer who cannot see where a tool is built cannot plan an inspection visit to the plant, and one who cannot see spec data cannot screen a maker before sending an RFQ.

The way through is to match a maker to your own situation.

How do you choose a manufacturer from this list

The right manufacturer on this list depends on your situation rather than a ranking, because the 24 differ on family coverage, build to order, lead times, documents, field support and spec data. No maker on this list is the right choice for every well.

  • If you want one supplier for the whole string, start with the eight that name all six families: Halliburton, NOV, Weatherford, Aventus Oil Tools, Gradwell Oilfield, Innovex, Maximus OIGA Private Limited and Oilmec Drilling Equipments. One supplier means one quality file and one inspection visit.
  • If you are building to your own drawing at volume, shortlist the 12 that state build to order or custom work: Halliburton, Weatherford, Aventus Oil Tools, Completion Oil Tools, D&L Oil Tools, Dongying Yuxin Machinery, Frontier Oil Tools, Maximus OIGA Private Limited, Parveen Industries, Peak Completions, Shandong Saigao Group and TAM International. Send the drawing, the batch size and the repeat schedule with the RFQ, and ask how drawing revisions are controlled between batches.
  • If you have a fixed spud date, Maximus OIGA Private Limited publishes the only lead-time bands on this list; from every other maker, ask for a written delivery date in the quotation.
  • If your operator runs strict QA acceptance, name the documents in the RFQ (material test report, inspection and test plan, heat traceability and test record) and compare what comes back. One maker on this list names that pack on its own website.
  • If the well is remote and you have no service partner, shortlist the six that say their own engineers run or set the tools (NOV, Aventus Oil Tools, Completion Oil Tools, Gradwell Oilfield, Mackeral Oil Tools and Wellcare Oil Tools), or pair any maker with your own service company.
  • If you want to screen makers before an RFQ, start with the 13 that publish spec tables. For the other 11, Maximus OIGA Private Limited among them, the datasheet comes with the quotation.

The wrong choice shows up downhole. A packer or bridge plug that will not set or seal, a liner top that leaks, or float equipment that lets cement back up the casing can mean a remedial cement job, a fishing job or lost rig days, which is why the documents and the setting support matter as much as the catalogue.

This guide also leaves some makers and tools out, on purpose.

Need expert guidance on the right solution?

Talk to our engineers about your project requirements.

Book a Consultation

What does this list not cover

This list leaves out drilling tools, completion tools outside the six families, companies the research did not reach, and any measure that is not published evenly enough to compare.

  • Drilling tools such as drill bits, mud motors and drilling jars belong to a different industry segment, even though search results for oil well tools mix the two.
  • Completion tools outside the six families are not compared. Frac plugs, sand control, safety valves, gas lift and tubing anchor catchers are left out, even where a listed maker makes them.
  • The research pool was 36 companies, drawn from the companies that appear in search results and AI-assistant answers for these questions. Other makers exist, in these four countries and in others, and a maker that is not on the list has not been judged.
  • This list does not cover local content. The rules differ by operator and country, so ask any maker how its supply route counts toward the operator's local-content score before you shortlist it.
  • A service company or rental company that runs or rents tools without saying it makes them does not meet the rules, so service and rental companies are not listed as makers.
  • Certification and licence status, registration details, founding dates, installation counts, customers, company size, prices, and pressure and temperature ratings are not scored. The steps below show how to check the ones your approval process needs.

How can you check that a maker and its product are genuine

Any maker on this list, and its product, can be checked the same way: confirm who built the tool, ask for the documents from a past order, check any licence it claims on the API Composite List, and ask for the test basis behind any rating. The nine steps below let you verify whether a tool is a genuine product of the maker named on it, or a counterfeit.

This guide prints no company's certification or licence status, its publisher's included, because the register is the source and the check takes a minute.

  1. Check the model. A model name tells you the design, not who built the tool: names such as AS1-X, BKR, RPT and Model L appear on several companies' websites, so ask for the maker's drawing number and the serial number on the tool.
  2. Confirm the maker. Ask for the manufacturing address in writing, and for a plant visit or a live video walk-through of machining, assembly and the test bay. Eight of the 36 companies checked for this guide did not pass the maker test, because their own sites describe them as a wholesaler, distributor, sourcing supplier, service company or marketplace, or sell products under other companies' names.
  3. Ask for a sample documentation pack from an earlier order, with the customer's details removed: the material test report, inspection and test plan, heat traceability record and test record. The pack is what an audit reads, so it shows you how your own order will be documented.
  4. Search the register. Look the maker up on the API Composite List at mycerts.api.org by its exact legal name and its name variants, or by the certification number it quotes. Further search fields filter by product, registration scope, status and country. A listing shows an organisation's licences past and present, so read the status beside each one, whether active, cancelled or withdrawn.
  5. Ask which facility the licence covers. Under API's Monogram Program requirements, a licence covers products made at the licensee's facility, and each specification needs its own licence, so ask which facility and which specification the Monogram licence covers, and whether that facility builds your order.
  6. Check the marking. Under the same requirements, the Monogram is always applied together with the licence number and the date of manufacture, so the number on the tool or its paperwork should match an active listing for the facility that built it.
  7. Check certificates against fraud alerts. API publishes a Fraud Alerts page listing certificates it says it never issued and false claims about its programs, so compare any certificate a vendor sends with that page.
  8. Question any licence quoted under API 19LH. It is not a Monogram specification, so if a vendor cites a licence under it, ask which document the vendor means.
  9. Ask for the test basis behind any rating. For a pressure or temperature rating, ask for the qualification test report for that size and material, the standard and its edition, the test sequence and acceptance criteria, and the serial or heat traceability that links the tested tool to the one you will receive.

Run the same steps on Maximus OIGA Private Limited as on every other maker. How this list itself was checked is set out next.

How was this list researched, and how is an entry corrected

This list was researched from each company's own website only, with marketplaces and directories used just to find the official site. In all, 36 companies were checked, the publisher included, and 24 met the rules.

The 12 left off fall into three groups: eight did not pass the maker test on their own sites' description of themselves, three name products in fewer than three of the six families, and one site could not be read.

Some things were deliberately not collected for any company, the publisher included: certification and licence status, registration details, founding dates, installation counts, customer names, ratings, prices and company size. No company supplied, paid for or signed off its entry.

A listed company, or one left off, that finds its entry out of date can write to Maximus OIGA Private Limited with the correction and the page on its own website that shows it. The entry is re-checked against that page and updated.

Every entry is re-checked against the company's own site whenever the page is updated.

The questions readers ask most about these makers follow.

Frequently asked questions

Who are some manufacturers of downhole completion equipment?

This list names 24 manufacturers of downhole completion equipment: the five global service companies Baker Hughes, Halliburton, NOV, SLB and Weatherford, and 19 independent makers in the United States, India, China and the United Arab Emirates.

Eight of them name products in all six families, namely Halliburton, NOV, Weatherford, Aventus Oil Tools, Gradwell Oilfield, Innovex, Maximus OIGA Private Limited and Oilmec Drilling Equipments, and the full list is in the tables above.

What are downhole completion tools?

Downhole completion tools are the equipment run into a well to finish it for production: they seal the annulus, hang and cement the liner, isolate zones and control flow between the reservoir and the tubing.

Drill bits and other drilling tools are a different group, used to make the hole before completion.

What are the components of a well completion?

A cased-hole well completion usually combines these components: the casing's cementing equipment (float shoes, float collars and, on long strings, stage cementing tools), a liner hanger where a liner is run, a production string with packers and flow control nipples and sleeves, and bridge plugs and cement retainers used to isolate or squeeze zones.

Those are the six families this list compares.

Which completion tool manufacturers publish lead times?

One of the 24 manufacturers on this list publishes production lead times: Maximus OIGA Private Limited, at 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class for its SpectraMax line.

The others quote delivery at enquiry, so ask for a written date in the quotation.

Which manufacturers make all six completion tool families?

Eight of the 24 makers on this list name products in all six families on their own websites: Halliburton, NOV and Weatherford among the service companies, and Aventus Oil Tools, Gradwell Oilfield, Innovex, Maximus OIGA Private Limited and Oilmec Drilling Equipments among the independents.

Baker Hughes and Completion Oil Tools name five.

Is a model name proof of who made a completion tool?

No. Model names such as AS1-X, BKR, RPT and Model L appear on several companies' websites, so a model name tells you the design, not the maker.

Ask for the maker's drawing and the serial number on the tool, and check any licence number it carries on the API Composite List.

Who compiled this guide

This guide was compiled by the engineering team at Maximus OIGA Private Limited, a completion tool manufacturer that appears in the list under the same rules as every other maker. It is the same team that answers technical questions on each SpectraMax tool.

The method is the one set out above: each company's own website, read against stated inclusion rules and seven comparison points, with a correction route for any company that disputes its entry.

It exists so that a sourcing lead can check a list of completion tool makers, family by family, before taking the next step, rather than trust a rank order.

What should you do next

Check any supplier on this list against the register yourself.

A quotation for SpectraMax completion tools from Maximus OIGA Private Limited needs the casing or tubing size, weight and grade, the connections at each end, the well's temperature, pressure and fluids including any sour service, the elastomer requirement, the tool list by family, and the documents your operator audits. The quotation comes back with the design basis, the lead-time band and the document list.

Request a SpectraMax quotation

Get to know Maximus OIGAExplore our products, capabilities, and certifications.Learn More

More Information

Related News & Insights

The documentation pack an operator will ask you for

The documentation pack an operator will ask you for

What a downhole tool's documentation pack must contain — mill test reports, heat traceability, the ITP and certificate of conformity — and nine checks to run before you sign off.

Read More

October 20, 2026

Best cement retainer and float equipment manufacturers in Asia

Best cement retainer and float equipment manufacturers in Asia

Seventeen cement retainer and float equipment makers in Asia: nine make retainers, fourteen float equipment, six both. Compared on seven points, unranked, every claim sourced.

Read More

October 20, 2026

Best bridge plug manufacturers in Asia

Best bridge plug manufacturers in Asia

Thirteen bridge plug manufacturers in Asia — China, India and the UAE — compared on seven points, across drillable, retrievable, composite and dissolvable plug types.

Read More

October 20, 2026

Best packer manufacturers in the Middle East

Best packer manufacturers in the Middle East

Twelve oilfield packer makers for Gulf wells: five build in the Gulf, seven ship in from India and China. Compared on six points, unranked, every claim sourced.

Read More

October 20, 2026

Best liner hanger manufacturers in Asia

Best liner hanger manufacturers in Asia

Eleven liner hanger manufacturers in Asia — four in China, six in India, one in the UAE — compared on seven points, from spec data and lead times to field running support.

Read More

October 20, 2026

Downhole completion equipment manufacturers in Southeast Asia

Downhole completion equipment manufacturers in Southeast Asia

Eight downhole completion makers with a plant in Southeast Asia, and six that import in — compared on the same points, plus the local-content rules that decide who you can buy from.

Read More

October 20, 2026

Best oil well tool manufacturers in the Middle East

Best oil well tool manufacturers in the Middle East

Seventeen oil well tool makers for Gulf wells — six build completion tools in the Gulf, eleven ship in from India and China — compared on six points across seven completion families.

Read More

October 20, 2026

Best downhole tool manufacturers in Asia

Best downhole tool manufacturers in Asia

Fourteen downhole tool makers in Asia — China, India, Indonesia and the UAE — compared on seven points and on which of the six completion-tool families each one builds.

Read More

October 20, 2026

 API 11D1 vs ISO 14310 - what a V0 rating actually certifies

API 11D1 vs ISO 14310 - what a V0 rating actually certifies

What a V0 rating really means under API 11D1 and ISO 14310 — and ten checks that take a packer or bridge plug claim from the brochure line to the validation record behind it.

Read More

October 20, 2026

 Indian downhole completion tool manufacturers compared: API status, plants, catalogue and lead times

Indian downhole completion tool manufacturers compared: API status, plants, catalogue and lead times

Most Indian suppliers list packers, bridge plugs and liner hangers. The harder question is who actually makes the goods, where, and what documents arrive with the order. This comparison puts six Indian downhole tool manufacturers side by side on manufacture, plant location, catalogue breadth, published lead times and the documentation pack, using only what each company publishes about itself.

Read More

September 25, 2026