
Downhole completion equipment manufacturers in Southeast Asia
Published:
Eight downhole completion makers with a plant in Southeast Asia, and six that import in — compared on the same points, plus the local-content rules that decide who you can buy from.
Downhole completion equipment manufacturers in Southeast Asia that you can shortlist from published facts come to eight: three in Indonesia, one in Malaysia and four in Singapore. Each one's own website names completion products, says it builds them and gives a regional plant address. The list is unranked, grouped by country, and compares every manufacturer on the same points.
If a maker's own website stops naming completion products, describes the company as a distributor or agent, or drops its regional address, it comes off the list, so you can re-check any entry against the same criteria yourself.
A separate section covers six makers based outside the region whose own websites say they supply it, for buyers who would import into their well.
Maximus OIGA Private Limited publishes this guide; it has no plant in Southeast Asia, so it is not in the main list, and it appears in the import section, judged on the same points as the other five.
Key takeaways
- Eight downhole completion equipment makers have a plant in Southeast Asia: three in Indonesia, one in Malaysia and four in Singapore.
- Packers and flow control tools are the most common lines among the eight, at six makers each; four make float equipment, three make subsurface safety valves, and only PT. Sagatrade Murni names liner hangers.
- Lead times are published by one of the fourteen makers in this guide: Maximus OIGA Private Limited, the publisher, at 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class for its SpectraMax line.
- Stock in Southeast Asia is stated by none of the fourteen makers, so ask any maker for a written delivery date and the documents that ship with the order.
- The six makers that import into the region, the publisher included, state no office, warehouse or service base in Southeast Asia.
- Local content decides who you can buy from in the two largest markets: in Malaysia the PETRONAS well completion licence code asks for manufacturing facilities in Malaysia, and in Indonesia tender preference goes only to goods with a domestic content (TKDN) certificate, so plant location matters.
- Certification, licence and registration status is not listed for any company in this guide, the publisher included, because the register is the source and every status is yours to verify.
How did a manufacturer qualify for this guide, and what would remove it
A manufacturer in this guide's main list had to qualify on its own website, which had to name downhole completion products, say the company makes them itself, and publish an address in a Southeast Asian country that is more than a sales office. Each rule takes about a minute to check on any listed maker's site.
The main list - three rules
- Its own website names downhole completion products, the tools run in the well as part of the completion: packers, bridge plugs, cement retainers, liner hangers, flow control tools such as the landing nipple and sliding sleeve, the subsurface safety valve, gas lift equipment, float equipment, stage cementing tools, and sand control screens with their accessories. A directory or marketplace listing does not count.
- Its own website says the company makes the products itself, in its own plant, with its own machining, or by its own assembly and testing, rather than reselling another maker's tools.
- Its own website publishes an address in a Southeast Asian country that is not only a sales office.
The import section - four rules
Makers based outside Southeast Asia are held to the same first two rules and to two more.
- Its own website names downhole completion products.
- Its own website says the company makes them itself.
- Its own website says where the company manufactures, at least down to the town.
- Its own website names Southeast Asia, or a country in it, as a market, an export destination or a contact point.
Maximus OIGA Private Limited, the publisher of this guide, fails the main list's address rule, because its one plant is in Vadodara, India. It meets the four import rules, so it sits in the import section with its absences printed like everyone else's.
The points every maker is compared on
Both lists show the completion families each maker names and where it says it builds. Five further points follow, and the import section adds what each site says about Southeast Asia.
- Whether the site publishes spec data, meaning size or specification tables on the product page or in a downloadable catalogue.
- Whether it publishes a lead time.
- Whether it says it will build to order, to the buyer's drawing or requirement.
- Which order documents it names, such as the material test report, the inspection and test plan, the heat traceability record and the test record.
- Whether it states field support, with its own people helping to run the tools in the well.
In the tables, "Not stated" means the company's own site does not say it on the pages read. It does not mean the company cannot do it.
Any of these changes would remove a company: its site stops naming completion products, describes it as a distributor, agent or brand owner rather than a maker, or drops its address. A maker in the import section also comes off if its site stops naming the region.
This guide does not score certification or licence status, registration or local-content status, founding dates, installation counts, customer names, prices, or pressure and temperature ratings. None of them is published evenly enough across these makers to compare, and the verification section later in this guide shows how to check the ones your approval process needs.
The tables below apply the same points to all eight makers with a plant in the region.
How do the Southeast Asia-based manufacturers compare
The eight downhole completion equipment makers with a plant in Southeast Asia compare like this: six name packers and six name flow control tools, four make float equipment, three make subsurface safety valves, only one names liner hangers, and none publishes a lead time.
Table A maps each maker by product family and plant; Table B shows what each one publishes on spec data, lead times, build to order, order documents and field running support.
Table A. Who makes what, and where
| Manufacturer | Where it says it builds | Packers | Plugs and retainers | Liner hangers | Flow control | Safety valves | Float and cementing | Sand control |
|---|---|---|---|---|---|---|---|---|
| Indonesia | ||||||||
| PT. Astajaya Nirwighnata (ASTA) | Medan, North Sumatra | Named | Not named | Not named | Not named | Not named | Named | Not named |
| PT. Mulia Jaya Mandiri (MJM) | Balikpapan, East Kalimantan | Not named | Not named | Not named | Not named | Not named | Named | Not named |
| PT. Sagatrade Murni (STM) | Samarinda, East Kalimantan | Named | Named | Named | Named | Not named | Named | Not named |
| Malaysia | ||||||||
| OMNI Oil Technologies (M) Sdn Bhd | Nilai, Negeri Sembilan | Named | Not named | Not named | Named | Not named | Named | Not named |
| Singapore | ||||||||
| Completion Products Pte Ltd | Tuas, Singapore, with a hub in Batam, Indonesia | Not named | Not named | Not named | Named | Not named | Not named | Named |
| Enecal Pte Ltd | Tuas, Singapore | Named | Not named | Not named | Named | Named | Not named | Not named |
| Petroleum Technology Products Pte. Ltd. (PTP) | Kian Teck Drive, Singapore | Named | Named | Not named | Named | Named | Not named | Not named |
| Star Petrotech Pte. Ltd. | Gul Avenue, Singapore | Named | Named | Not named | Named | Named | Not named | Not named |
Named: the family appears on the company's own website. Plugs and retainers covers bridge plugs, cement retainers and frac plugs. Not named: not found on its own website.
Table B. What each one publishes
| Manufacturer | Spec data | Lead times | Build to order | Order documents | Field running support |
|---|---|---|---|---|---|
| Indonesia | |||||
| PT. Astajaya Nirwighnata (ASTA) | Partly | Not stated | Partly | Not stated | Not stated |
| PT. Mulia Jaya Mandiri (MJM) | Not stated | Not stated | Partly | Not stated | Partly |
| PT. Sagatrade Murni (STM) | Published | Not stated | Stated | Not stated | Partly |
| Malaysia | |||||
| OMNI Oil Technologies (M) Sdn Bhd | Not stated | Not stated | Stated | Not stated | Partly |
| Singapore | |||||
| Completion Products Pte Ltd | Partly | Not stated | Stated | Partly | Not stated |
| Enecal Pte Ltd | Not stated | Not stated | Stated | Not stated | Not stated |
| Petroleum Technology Products Pte. Ltd. (PTP) | Not stated | Not stated | Partly | Not stated | Not stated |
| Star Petrotech Pte. Ltd. | Published | Not stated | Stated | Partly | Not stated |
Published or Stated: the company's own website says it. Partly: a weaker statement, such as sizes on request or a quality process without named order documents. Not stated: not found on its own website, which does not mean the company cannot do it; ask.
The entries that follow take each manufacturer in turn, by country.
What does each Southeast Asia-based manufacturer publish
Each manufacturer below has an entry built from its own website, in the same four parts: where it builds, the completion line it names, what it publishes, and what to ask it for.
Indonesia
PT. Astajaya Nirwighnata (ASTA)
PT. Astajaya Nirwighnata (ASTA), based in Sampali, Medan, North Sumatra, names float shoes and float collars, including stab-in and auto fill-up types, a dual stage cementing collar, cementing plugs and a lead seal packer for gravel pack completions on its own website. Its site calls the Medan factory a manufacturing and testing facility; the head office is in Jakarta. It publishes a size table for the lead seal packer, with other grades and sizes on request. Ask it for float equipment size data, a lead time and the order documents.
PT. Mulia Jaya Mandiri (MJM)
PT. Mulia Jaya Mandiri (MJM), based in Karang Joang, Balikpapan, East Kalimantan, names float shoes and float collars, including stab-in types, guide and reamer shoes, a stab-in adapter and cementing plugs in the casing accessories brochure on its own website. It describes its office and workshop as a general machine shop that makes oil and gas tools. It publishes features only, with other sizes on request and a post-sale assistance scheme. Ask it for a current catalogue with size data and a written lead time.
PT. Sagatrade Murni (STM)
PT. Sagatrade Murni (STM), based in Selili, Samarinda, East Kalimantan, with a service centre in Bekasi, names the widest range on the main list on its own website: mechanical and hydraulic liner hangers with liner top packers and tie-backs, retrievable production packers, an external casing packer, bridge plugs and cement retainers, float equipment with a dual-stage cementing collar, and landing nipples and sliding sleeves. It publishes family catalogues with size tables and offers standard and custom-built equipment. Ask it for a lead time and the order documents.
Malaysia
OMNI Oil Technologies (M) Sdn Bhd
OMNI Oil Technologies (M) Sdn Bhd, based at its manufacturing plant in Nilai, Negeri Sembilan, with a head office in Kuala Lumpur, names packers including a dual packer, landing nipples, sliding side doors, blanking plugs, flow couplings, crossovers and floats on its own website. It publishes product names without size data and offers design through to installation; its completion page says at least one product is made exclusively for another company. Ask whether your items are sold under its own name, and for size data and a lead time.
Singapore
Completion Products Pte Ltd
Completion Products Pte Ltd, based at two sites in Tuas, Singapore, with a hub in Batam, Indonesia, names sand control screens and gravel pack tools, sliding sleeve doors, landing nipples, lock mandrels, chemical injection mandrels and other completion accessories on its own website, but no packers or bridge plugs. Its site lists CNC machining and a pressure test bay. It publishes screen construction details, ships screens with a quality dossier and customises products to tender inputs and well conditions. Ask it for accessory size tables and a lead time.
Enecal Pte Ltd
Enecal Pte Ltd, based in Tuas South, Singapore, names tubing-retrievable and wireline-retrievable subsurface safety valves, permanent and retrievable hydraulic-set packers, sliding sleeves, chemical injection and gas vent valves, lock mandrels and landing nipples on its own website. The site calls the Tuas address its manufacturing plant and testing facility, under the line "Made in Singapore, Shipped Globally". It publishes feature lists without size tables and offers custom-engineered tools built to project requirements. Ask it for datasheets in your sizes, a lead time and the order documents.
Petroleum Technology Products Pte. Ltd. (PTP)
Petroleum Technology Products Pte. Ltd. (PTP), based in Singapore on Kian Teck Drive, names subsurface safety valves, hydraulic-set permanent packers, flow control tools, gas lift and chemical injection mandrels, sliding sleeves, landing nipples and bridge plugs on its own website. The site says its products are engineered, developed and tested in its Singapore facility and assembled by its own technicians. It publishes product families without size tables, with a range of material and elastomer options. Ask whether machining is done in-house, and for size data and a lead time.
Star Petrotech Pte. Ltd.
Star Petrotech Pte. Ltd., based in Singapore on Gul Avenue, names retrievable and permanent packers and setting tools, landing nipples and lock mandrels, sliding side doors, subsurface safety valves, and dissolvable frac plugs and frac sleeves on its own website. Its site calls it a downhole completion equipment manufacturer but has no facility page. It publishes product size tables, offers standard and custom tools, and describes quality inspection with PFMEAs and control plans. Ask it for a plant visit or video walk-through, a lead time and the order documents.
Six more makers build outside Southeast Asia but say on their own websites that they supply the region, and the next section sets them out on the same points.
Which manufacturers outside Southeast Asia say they supply the region
Six downhole completion equipment makers based outside Southeast Asia say on their own websites that they supply the region: each names Southeast Asia or a country in it as a market or a contact point, and none states an office, warehouse or service base there. Maximus OIGA Private Limited, the publisher of this guide, is one of the six and is judged on the same points.
Fifteen makers outside the region were checked besides the publisher, and five met all four import rules.
Table C. Makers outside the region that say they supply it
| Manufacturer | Where it says it builds | Completion families named | What its own site says about Southeast Asia | Lead times | Field running support | Order documents |
|---|---|---|---|---|---|---|
| China | ||||||
| Dongying Yuxin Machinery Manufacturing Co., Ltd. | Dongying, Shandong | Packers, liner hangers, float equipment | Names Malaysia among the markets it serves | Not stated | Not stated | Partly |
| Puyang Zhongshi Group Co., Ltd. (PYZS) | Puyang, Henan | Float equipment and stage collars; liner hangers and packers | Names Thailand, Indonesia and Southeast Asia among its export markets | Not stated | Not stated | Partly |
| India | ||||||
| Completion Oil Tools Private Limited | Khushkhera, Rajasthan | Liner hangers, packers, bridge plugs and cement retainers, flow control, float equipment | Names Indonesia, Thailand and Vietnam as markets it has expanded into | Not stated | Stated | Not stated |
| Maximus OIGA Private Limited | Manjusar / Savli GIDC, Vadodara, Gujarat | Packers, liner hangers, bridge plugs and cement retainers, flow control, float equipment, stage cementing tools | Names Southeast Asia as a region it supplies; no country, office or agent named | Published: 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class | Not stated | Stated |
| Parveen Industries Pvt. Ltd. | Plants named in Delhi, Haryana, Mumbai and Igatpuri; addresses not published | Packers, bridge plugs and cement retainers, frac plugs, flow control, gas lift | Lists a contact under "South East Asia" with a Jakarta address, not described as an office or agent | Not stated | Not stated | Not stated |
| United Arab Emirates | ||||||
| Aventus Oil Tools | Dubai Investment Park, Dubai | Liner hangers, packers, bridge plugs and cement retainers, flow control, float equipment | Records a supply of float equipment to Vietnam | Not stated | Stated | Not stated |
Every cell is what the company's own website says about itself. No company in this table states an office, warehouse or service base in Southeast Asia. Not stated: not found on its own website; ask.
Two of the six, Completion Oil Tools Private Limited and Aventus Oil Tools, state field running support. On order documents, Maximus OIGA Private Limited names a full pack, and Dongying Yuxin and PYZS name part of one.
China
Dongying Yuxin Machinery Manufacturing Co., Ltd.
Dongying Yuxin Machinery Manufacturing Co., Ltd. builds in Shengli Industrial Park, Dongying, Shandong, and names Malaysia among the markets it serves. Its site publishes size tables on its product pages, says the lead time is confirmed once the specification and quantity are fixed, and says inspection records and material documents can be agreed in the purchase requirements. Ask it for a written lead time and the agreed document list in the quotation.
Puyang Zhongshi Group Co., Ltd. (PYZS)
Puyang Zhongshi Group Co., Ltd. (PYZS) builds in the Mazhuangqiao Industry Zone, Puyang, Henan, and names Thailand and Indonesia, and Southeast Asia as a region, among its export markets. Its float collar page describes material traceability that starts from the mill certificates. Ask it for size data on the product family you need, a written lead time, and who supports the job when the tools are run in the well.
India
Completion Oil Tools Private Limited
Completion Oil Tools Private Limited builds at its manufacturing base in Khushkhera, Rajasthan. Its site names Indonesia and Thailand as markets it has expanded operations into, and Vietnam as a market it has expanded supply to, with Indonesia marked on its global presence map. It states packer installation and liner hanger running services by its own field engineers. Ask it for a written lead time and the documentation pack.
Maximus OIGA Private Limited
Maximus OIGA Private Limited builds the SpectraMax line at one plant, Manjusar / Savli GIDC, Vadodara, and says it supplies Southeast Asia as a region, naming no country, office, agent or stock point. It publishes lead times of 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class, and a document pack per order. It runs no field crew. Ask how delivery and clearance work and which local partner holds the registration.
Parveen Industries Pvt. Ltd.
Parveen Industries Pvt. Ltd. names plants in Delhi, Haryana and Mumbai, and at Igatpuri for downhole equipment, with a registered office in Delhi, but does not publish the plant addresses. Its contact page lists a contact in Jakarta under the heading "South East Asia" without saying whether it is an office, an agent or a distributor. It publishes datasheets with size ranges. Ask what the Jakarta contact is, which plant builds your order, and the lead time.
United Arab Emirates
Aventus Oil Tools
Aventus Oil Tools builds at its Dubai facility in Dubai Investment Park, United Arab Emirates, and its site records a supply of 13-3/8 inch float equipment to Vietnam. It states field running support, redressing between runs and hands-on workshop training. Ask it for a written lead time and the documentation pack.
Lead times are the clearest gap across all fourteen makers in this guide: among the six that import into the region, only Maximus OIGA Private Limited publishes them, in weeks by product class.
What do almost none of these manufacturers publish
Lead times are published by one of the fourteen makers in this guide: none of the eight makers in the region and none of the five other importers publishes a lead time, and the one that does is Maximus OIGA Private Limited, the publisher of this guide, at 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class for its SpectraMax line. Several others promise only "on-time", "timely" or "prompt" delivery.
Order documents follow the same pattern. One maker, Maximus OIGA Private Limited, names a full pack that ships with each order. Four mention part of one: Completion Products Pte Ltd ships its screens with a quality dossier, Star Petrotech Pte. Ltd. describes its inspection process, Dongying Yuxin agrees inspection records in the purchase terms, and PYZS traces material from mill certificates. The other nine name none, so a buyer who needs a material test report, an inspection and test plan or heat traceability has to ask for each one.
Stock is the widest gap. None of the fourteen states stock, spares or a warehouse in Southeast Asia.
Spec data is thin even among the eight regional makers: two, PT. Sagatrade Murni and Star Petrotech Pte. Ltd., publish size tables, and two more publish them in part.
Field support is stated by two makers, Completion Oil Tools Private Limited and Aventus Oil Tools, both importers, and in part by three of the regional makers.
The publisher fills two of these gaps and leaves two open. Maximus OIGA Private Limited has no plant, office, agent or stock in Southeast Asia, and publishes no spec tables on its catalogue pages, so a regional buyer depends on a local partner for registration and on the quotation for performance data.
Each gap has a cost. With no lead time, the schedule waits on quotations. Missing document names surface late, when QA has to approve the tools at acceptance. And with no stock in the region, a failed run waits for a replacement to be shipped and cleared.
For an imported tool, that missing presence in the region means working through a local partner, and in Indonesia and Malaysia the local partner is also what the local-content rules turn on.
What local-content and registration rules apply in Southeast Asia
Local-content and registration rules in Southeast Asia decide, for a buyer of completion tools, whether an imported tool can compete at all in Indonesia and Malaysia; elsewhere in the region they shape the tender but do not exclude imports.
Indonesia
Indonesia's production sharing contractors buy under the SKK Migas procurement guideline PTK-007, Revision 05, which requires domestic products to be used where they are listed. TKDN is the domestic content value of a product, shown on a TKDN certificate. Each goods tender sets a minimum, and goods with a certified TKDN of at least 25 percent receive a price preference that rises with the certified value.
Every bidding vendor must be registered in the SKK Migas CIVD system and hold a valid SPDA. A tool made outside Indonesia has no Indonesian TKDN certificate, so it earns no preference. It competes where the item is not on the domestic list, where domestic capacity is short, or where the tender's minimum is low; minimums are set tender by tender, and published liner hanger tenders have set them anywhere between none and 35 percent.
For a maker based elsewhere, the workable route is to sell through an Indonesian company, because CIVD registration is built around an Indonesian legal entity.
Malaysia
Malaysia's upstream rule is the PETRONAS licence: to bid for PETRONAS and production sharing contractor work, a vendor needs a valid licence in the SWEC code for the product and must be locally incorporated. The well completion code, SWEC 30103400S Well Completion Equipment & Services, covers subsurface safety valves, packers, nipples, sliding sleeves, gas lift mandrels, seal assemblies and control lines, and asks for a self-operated vendor with workshop and manufacturing facilities in Malaysia.
Liner hangers sit under their own self-operated code, which asks for an office and workshop in Malaysia. Float equipment can be registered by a manufacturer or by an agent.
PETRONAS names three routes for a foreign company: appoint a licensed local agent, open a local branch, or form a joint venture with a local company. Each code also sets a minimum Bumiputera share. Because the completion code has no agent mode, supplying an imported packer or safety valve in Malaysia takes a Malaysian set-up with its own workshop and manufacturing facilities, either the maker's own or a licensed local partner's.
Brunei
Brunei applies Directive 2 on the Local Business Development Framework to operators, contractors and subcontractors. Work is allocated by technology level and contract value, and specialised or proprietary equipment carries best-endeavours local targets. For goods, the guideline says "the preference is to deal directly with the Original Equipment Manufacturers", and Brunei Shell Petroleum registers vendors through its supplier system, asking for an OEM appointment letter and its own product approval.
Thailand and Vietnam
Thailand has no published upstream local-content rule that this research found. PTTEP registers vendors through its vendor portal and asks for prequalification on larger contracts.
Vietnam's model production sharing contract, the form used for upstream contracts with PetroVietnam, asks contractors to "preferentially use Vietnamese materials, equipment and services based on a competitive basis in terms of price, quality and time of delivery", with no percentage threshold. An imported tool competes there on price, quality and delivery.
None of these national rules sets the product standard: the operator's tender specification does, so read it for any API or ISO requirement and check the claim the way the verification steps later in this guide show.
For the two lists, a maker with a plant in the country is the most direct route where local content is scored, and a maker outside the region needs a registered local partner in Indonesia and Malaysia. Which route fits depends on your market and your well, which is where choosing a maker from this guide starts.
Need expert guidance on the right solution?
Talk to our engineers about your project requirements.
How do you choose a manufacturer from this guide
The right downhole completion equipment maker for a Southeast Asian well depends on your market's local-content rule and your own situation rather than on a ranking, because the fourteen makers in this guide differ on location, product range, lead times, documents and field support. No maker in this guide is the best choice for every well, so choose by situation.
- If your tender scores local content, as in Indonesia and Malaysia, start with the makers that have a plant in that country: PT. Astajaya Nirwighnata, PT. Mulia Jaya Mandiri and PT. Sagatrade Murni in Indonesia, and OMNI Oil Technologies (M) Sdn Bhd in Malaysia. For an imported tool, line up the registered local partner before the RFQ, and check any TKDN certificate or PETRONAS licence yourself.
- If you need a full completion string from one plant, PT. Sagatrade Murni is the only maker in the region naming liner hangers, packers, bridge plugs, cement retainers, flow control and float equipment. Among the importers, Completion Oil Tools Private Limited, Aventus Oil Tools and Maximus OIGA Private Limited each name all of these families. Send the drawing, the volume and the repeat schedule with the RFQ, and ask how drawing revisions are controlled between batches.
- If you need safety valves, flow control or sand control, look at the Singapore makers: Enecal Pte Ltd, Petroleum Technology Products Pte. Ltd. and Star Petrotech Pte. Ltd. name subsurface safety valves, packers and flow control tools, and Completion Products Pte Ltd names sand control screens and gravel pack tools.
- If you have a fixed spud date and strict QA acceptance, Maximus OIGA Private Limited publishes the only lead-time bands and the only full document list in this guide. From every other maker, ask for a written delivery date and name the documents in the RFQ (material test report, inspection and test plan, heat traceability, test record), then compare the quotations that come back.
- If the well is remote and you have no service partner, shortlist the two importers that state field running support, Completion Oil Tools Private Limited and Aventus Oil Tools, or the regional makers that state it in part, PT. Sagatrade Murni, OMNI Oil Technologies (M) Sdn Bhd and PT. Mulia Jaya Mandiri. Any maker can also be paired with your own service company, which is how Maximus OIGA Private Limited supplies its tools.
The wrong choice shows up downhole. A packer that sets early or will not release, slips that do not grip the casing, or a seal that leaks can mean a fishing job, a remedial cement squeeze or lost rig days, and on a remote field the replacement has to be shipped and cleared first. That is why documents, setting support and local stock count for as much as the catalogue.
Some makers are left out of this guide on purpose, and the next section says which.
What does this guide not cover
This guide does not cover the global service companies, regional distributors, agents and service houses, makers without a readable website, or any measure not published evenly enough to compare.
- The global service companies, such as SLB, Baker Hughes, Weatherford and NOV, sell completion tools in the region and some have a plant in the region, but each is an integrated service company headquartered outside it.
- Several regional companies sell completion tools made by others, or rent and run them. Each one is a distributor, an agent or a service house, so it fails the rule that a maker makes its products itself.
- No maker that met the rules was found in Thailand, Vietnam, the Philippines, Brunei or Myanmar; the companies found there distribute, repair, or make wellhead, OCTG or fabricated equipment. Wellhead, OCTG and drilling tools are not covered, because this guide covers the tools run in the well as part of the completion.
- Certification and licence status, registration and local-content status, founding dates, installation counts, customers, prices and pressure or temperature ratings are not scored, and the next section shows how to check each one yourself.
How can you verify any entry, and whether a product is genuine
Any entry in this guide can be verified, and a product checked as genuine, against public sources and the maker's own papers: open the maker's own product page, confirm where it builds, ask for a sample documentation pack, check any licence or marking it claims on the API Composite List, ask for the test basis behind any rating, and check any local-content certificate or licence at its source.
This guide prints no company's certification, licence or registration status, its publisher's included, because each register is the source and each check takes minutes. Counterfeit marking is a real risk in this market: the API Fraud Alerts page lists certificates that API never issued and certificates that were altered, and says the API Composite List is updated in real time.
- Open the maker's own website, its product page and catalogue, and match the model names to the ones in the quotation.
- Ask for the manufacturing address in writing, and for a plant visit or a live video walk-through of machining, assembly and the test bay. This matters most where a site gives an address it does not label as a plant, as two of the Singapore entries do.
- Ask for a sample documentation pack from an earlier order, with the customer's details removed: the material test report, the inspection and test plan, the heat traceability record and the test record. That pack is what an audit reads.
- Search the maker's exact legal name, and its name variants, on the API Composite List. A Monogram licence covers one API specification at one named facility, and a listing can read active, cancelled or withdrawn, so ask which facility the licence covers and whether that facility builds your order. Then match the licence number on the tool's marking to that facility, and compare any certificate you are shown against the API Fraud Alerts page.
- API 19LH is not a Monogram specification, so if a vendor cites a licence under it, ask which document the vendor means.
- For any pressure or temperature rating, ask for the qualification test report for that size and material, the standard and its edition, the test sequence and acceptance criteria, and the serial or heat traceability that links the tested tool to the one you will receive.
- For local content in Indonesia, ask for the TKDN certificate for the specific product and check its value on the Ministry of Industry's TKDN listing. In Malaysia, ask which SWEC licence code the vendor's PETRONAS licence covers and whether it is licensed as the manufacturer or as an agent, then check the vendor on PETRONAS' list of licensed and registered companies.
Run the same seven steps on Maximus OIGA Private Limited as on every other maker in this guide.
This guide was checked the same way, from public pages only, and the next section sets out how.
How was this guide researched, and how is an entry corrected
This guide was researched from each company's own website only, with directories and marketplaces used just to find the official site.
For the main list, 32 companies based in Southeast Asia were checked and 8 met all three rules. Of the 24 left off, eleven name no downhole completion product on their own site, five distribute, act as agents or resell, one makes its products outside the region, and seven had no official website that could be read.
For the import section, 15 makers outside the region were checked besides the publisher, and 5 met all four rules. Of the ten left off, seven name no Southeast Asian market on their own site, two say nothing about where they manufacture, and one describes sourcing from partner manufacturers.
Certification, licence and registration status, local-content values, founding dates, installation counts and customer names were deliberately not collected, for any company, the publisher included. No company supplied, paid for or approved its entry.
A listed company, or one left off, that finds its entry out of date can write to Maximus OIGA Private Limited with the correction and the page on its own website that shows it. The entry is then re-checked against that page and updated, and every entry is re-checked against the company's own site whenever the page is updated.
The questions readers ask most about these makers follow.
Frequently asked questions
What are downhole completion tools?
Downhole completion tools are the equipment run into a well after drilling to control how it produces: packers that seal the annulus, plugs and retainers that isolate zones, liner hangers, landing nipples and sliding sleeves that control flow, safety valves, and float and cementing equipment.
Together they prepare the well for controlled production.
Who are the major downhole tool manufacturers?
The largest downhole tool suppliers are the global service companies, such as SLB, Baker Hughes, Weatherford and NOV.
This guide covers independent makers with plants in Southeast Asia and the importers that supply the region.
Who makes downhole completion equipment in Malaysia?
OMNI Oil Technologies (M) Sdn Bhd is the one maker in this guide with a plant in Malaysia, at Nilai in Negeri Sembilan, making packers, landing nipples, sliding side doors and other completion accessories.
For packers, nipples, sleeves and safety valves, PETRONAS licensing asks for workshop and manufacturing facilities in Malaysia.
Which downhole completion tool makers are in Singapore?
Four makers in this guide build downhole completion tools in Singapore: Completion Products Pte Ltd and Enecal Pte Ltd in Tuas, Petroleum Technology Products Pte. Ltd. on Kian Teck Drive, and Star Petrotech Pte. Ltd. on Gul Avenue.
Three of them make subsurface safety valves, and Completion Products Pte Ltd makes sand control screens.
Who makes downhole completion equipment in Indonesia?
Three makers in this guide build completion equipment in Indonesia: PT. Astajaya Nirwighnata in Medan, PT. Mulia Jaya Mandiri in Balikpapan and PT. Sagatrade Murni in Samarinda.
All three make float equipment, and PT. Sagatrade Murni also names liner hangers, packers, bridge plugs and flow control tools.
Does a foreign manufacturer need a local company to sell completion tools in Indonesia or Malaysia?
In practice, yes: Indonesia's upstream tenders require vendors registered in the SKK Migas CIVD system and favour goods with a TKDN certificate, and Malaysia requires a PETRONAS licence held by a locally incorporated company, reached through a local agent, a branch or a joint venture.
The local-content section of this guide sets out the detail by market.
Which of these manufacturers publish lead times?
One of the fourteen manufacturers in this guide publishes lead times: Maximus OIGA Private Limited, at 1 to 4, 4 to 12 and 8 to 16 or more weeks by product class for its SpectraMax line.
The others quote delivery at enquiry, so ask for a written date in the quotation.
Who compiled this guide
This guide was compiled by the engineering team at Maximus OIGA Private Limited, a downhole completion equipment manufacturer based in India that builds the SpectraMax line and appears in the import section under the same rules as every other maker.
The team built it from each company's own website, against published inclusion rules for two separate lists, as the method section describes. It exists to give a sourcing lead a shortlist of completion tool makers for Southeast Asia that they can check for themselves, not to rank them, and any listed company can ask for a correction.
If you are building that shortlist now, the next step is below.
Related Blogs





More Information




